80 single-group Expansion Joint Replacement Notice, bridge expansion joints Installation Notes 1 telescopic device due to transport length limit, can be segmented manufacturing, field splicing. Stored at the site of the telescopic device should be placed in parallel, not cross stacking to prevent deformation. 2 factory, transportation and connection fixtures provided for convenience only, the gap is not given location. When the telescopic device installation, should only be carried out under the supervision of engineers recognized. As specified on the design documents to file under the bridge design is based. 3 telescopic device before hoisting concrete tank should be set aside to fight hair, cleaned. When the value of a telescopic device installation width along the bridge to the deal said on gap expansion joints, and its top surface elevation and design elevation anastomosis pad level, and then put through a coupling level value to steel, telescopic device The anchor bars and weld steel beams embedded on both sides (try to increase the weld and weld length, to extend the life telescopic device), relax fixtures to free expansion, this time stretching device has entered the state. 4 After completing the above steps, installing the necessary template to prevent the inflow of mortar joints, and then carefully washed with water. Reserved slots in the concrete pouring of more than concrete C50. Pouring concrete should take the necessary measures, vibrating compaction. 5 After the initial setting of concrete, unplug the template, timely clear and shaped steel expansion joints installed in the tape slot foreign body. 24 hour free technical advice, please contact us to discuss business, we will be happy to serve you. Contact: Manager Li Mobile 13383388737 Company Website: http: //www.hbgcxj.com/